Product detailed description

iGET SECURITY M4
is ideal for securing all buildings - houses, apartments, cottages, offices, but also garages, shops, warehouses, offices, etc. It is a wireless alarm with simple installation and control, which not only secures your house, but can also remotely or according to a timer trigger electrical appliances using controlled sockets, and at any time it is possible to monitor what is happening using IP cameras. In the event of an alarm, the alarm starts recording on this camera and immediately shares the video with the app on your mobile phone. All detectors are wireless, most of them are battery powered, the main unit is powered from 230 V mains but also has its own backup battery with a lifetime of up to 8 hours. Thanks to this, the building is constantly guarded even during power outages.

Application
The app is freely available on Google Play and iOS market. With this application, you can clearly perform complete setup, add detectors, control IP cameras, controlled sockets, etc. The app is available in Czech, Slovak, English, Polish, Hungarian and many other languages. One app brings together alarm, IP camera and controlled socket settings and control, all-in-one.

Wireless transmission
There is no need to pull wires or complex setup to connect the detectors to the central unit. The detectors are wireless and most are battery powered. Adding more detectors is a matter of minutes. The central unit contains a SIM card slot that can be used to send an alarm message.
Wireless detectors have a range of up to 80 m, some even 200 m. Simply insert the batteries/plug in and place the detector in the space. Activating and deactivating the alarm is also quick and easy, either using a wireless key fob, wireless keypad, RFID chip or mobile app. Durable key fobs serve as alarm remotes. It is possible to activate/deactivate the alarm, turn on the alarm, and turn on the special Home mode only for certain zones.

Alarm communication method with application/phone
Alarm iGET SECURITY M4 is connected to the Internet. It automatically communicates with the server. Connection of the M4 to the Internet is necessary and can be done via WiFi connection (the alarm includes WiFi 802.11 b/g/n 150 Mbps) or via Ethernet cable with RJ45 connector (speed 10/100 Mbps). The user's mobile phone must be connected to the Internet anywhere in the world using a data connection or WiFi. The alarm thus communicates with the mobile phone via data. It is not possible to connect the alarm to the Internet via data transfer via SIM card. GSM connection with SIM card is here as an additional/back-up option how the alarm can contact the user - by sending SMS about the alarm. Wireless IP cameras are directly connected to your home WiFi network with Internet connection, just like the M4 alarm.

Many user accounts
Alarm iGET SECURITY M4 contains 3 levels of user accounts. The highest is the "Administrator", who performs all the settings and controls. There is also a "User" - he can control the alarm, but does not perform settings (activate/deactivate/ home mode/ SOS, view online video from cameras, control sockets, etc.). The last level is Host, it can only control the following modes: activate/deactivate/ home mode/ SOS.

Quickly share settings and create an account
If an administrator wants to add more users, it is very easy. Just install the "iGET M4" app on your next mobile phone. Then view the QR code on the first phone to share and scan it using the second phone in the app. This completes the pairing.

Large portfolio of additional accessories and wireless transmission
There is no need to pull wires or complex setup to connect the detectors to the central unit. The detectors are wireless and most are battery powered. Adding more detectors is a matter of minutes. The wireless detectors have a range of up to 80 m, and selected detectors have a range of 200 m. Simply insert the batteries/plug in and place the detector in the space. All accessories that are compatible with the iGET SECURITY M4 alarm are marked iGET SECURITY M3Px (where "x" is the accessory number 1 to 99).

Control of controlled 230V sockets
The iGET SECURITY M4 alarm not only provides security, but also intelligent home control. With the help of remotely controlled sockets for controlling one 230 V appliance, it is possible to control lighting, heating, air conditioning, etc. The socket is plugged into a normal mains socket and the appliance into it. You can remotely switch it on/off, set a timer or link to a function.

IP cameras
It is also possible to add wireless FullHD IP cameras iGET SECURITY M3P15v2 (indoor rotating) and M3P18v2 (outdoor fixed), and HD M3P20v2 (indoor fixed) to the iGET SECURITY M4 alarm. You can always connect to this camera via online data transfer. The cameras are connected via WiFi to a wireless network.

Possibility to name zones/detectors/controllers
iGET SECURITY M4 offers full naming of zones/detectors and all accessories. Up to 160 characters can be entered. This is more convenient and clearer than just choosing from a preset menu of room names.

Protection against sabotage, power disconnection
When the alarm tracks a signal that tries to jam the band on which the wireless detectors communicate, it immediately triggers an alarm. When the main 230 V power supply of the alarm is disconnected or connected, the app immediately informs the user. The backup battery in the alarm lasts up to 8 hours.

Low battery in the detector
If the detector has a low battery, the yellow/red LED on the detector will light up. However, the user of the iGET SECURITY M4 alarm does not need to check this. The detector sends the information about the low battery to the iGET SECURITY M4 alarm, which informs the user about this via the app.

Alarm introduction iGET SECURITY M4

Main parameters:- Intelligent wireless security system with Internet connection via WiFi and Ethernet connector. In addition, in case of an alarm, it sends SMS via the GSM mobile network. Attention: it does not have a data connection via SIM card.- It controls indoor and outdoor IP cameras, switches controlled 230V sockets, and communicates with more than 20 other types of wireless accessories, designated as M3Px.
- Supports connection of up to 300 wireless accessories.
- The app for overall system management and setup is available for both Android and iOS market, and is available in Czech, Slovak, English, Polish, Hungarian and other languages.
- The M4 alarm also automatically downloads and installs the latest software/firmware updates from the server to keep it up to date.
- Protection against sabotage - when the alarm tracks a signal that tries to jam the band on which the wireless detectors communicate, it immediately triggers an alarm.
- It informs about the status/alarm via the app and also sends SMS in case of an alarm.
- Alarm activation and deactivation is done via key fobs / keypad / RFID keys / mobile phone app.
- Includes integrated 100 dB internal siren.
- It contains a backup battery, thanks to which the alarm is still fully active even when the main power supply is disconnected (up to 8 hours), it informs the user about this main power failure via the app.
- Many options for setting alarm zones, each detector/accessory can be named with its own name.
- Includes a shock detector to detect damage to the M4 alarm.
- Informs the user via the app which battery accessory is running low on battery. This battery accessory has a high battery life of up to 2 years.
- Secret alarm in the event of a robbery: the user enters a code to disable the alarm, but this unique code is different from the classic one and activates a silent alarm in the alarm and informs other users about it.
- Range of wireless detectors up to 80 m, with selected detectors up to 200 m. The detectors are easy to fix to the desired location.- The power consumption of the M4 alarm main unit is 3 to 4 Watt.- You can freely monitor what's happening in your home using the IP cameras you've purchased, and your phone will provide you with up-to-date video immediately in the event of an alarm.For more tips and tricks for the iGET SECURITY M4 alarm, please visit the Support page.

Contents of the package

1x M4 - central alarm unit, provides control of all wireless detectors and the entire control

system. It communicates via WiFi and Ethernet connector, also sends SMS about alarm via GSM.

1x M3P13v2 - wireless touch keypad with RFID reader. Battery life up to 6 months, adapter included

1x M3P1 - wireless PIR motion detector for room security, high battery life up to 2 years.

1x M3P4 - wireless magnetic sensor for securing doors/windows, high battery life up to 2 years.

1x M3P5 - remote control (key fob) for quick alarm activation and deactivation.

2x M3P22 - RFID key for attaching to the M3P13v2 wireless keypad for quick alarm activation and deactivation.

2x Power adapter for M4 alarm and M3P13v2 keypad.

1x Detailed user manual in Czech, Slovak, English, Polish and Hungarian.