iGET SECURITY P14 - Wireless Smoke Detector

Standalone smoke detector, as well as the P14

wireless smoke detector. This smoke detector can operate independently or as an accessory for the iGET SECURITY M3B and M2B alarms. This detector is also compatible with many alarms from other brands; for information regarding compatibility, please contact our technical support.
Smoke is detected by the scattering of optical beams within the detector chamber, which then triggers an audible and visual alarm.

Smoke detectors have become an integral part of homes, cottages, apartments, garages, and similar spaces.

Key specifications:

• The detector is designed to detect smoldering fires; upon detection of a smoldering fire, visual and audible alarms are activated. When connected to a central alarm unit, that unit will also be notified of the alarm.
• This detector operates on the principle of scattered light and is highly sensitive to larger particles contained in smoke.
• You can check whether the detector is fully functional using the built-in test button,
• It is primarily intended for use in homes, cottages, and apartments. It is not intended for industrial environments,
• It is not intended for motorhomes or mobile homes,
• The detector can also be wirelessly connected to the iGET SECURITY M3B and M2B alarms, ensuring comprehensive protection. Upon receiving an alarm signal, the alarm system will sound a siren and send an SMS notification.
• The detector operates at a frequency of 433 MHz, which allows it to be used with many alarms from other brands that operate at the same frequency,
• A simple addition to the basic iGET SECURITY M3B and M2B alarm kit.

Specifications:

Transmission frequency: 433 MHz
Operating temperature: -20°C to +60°C
Operating humidity: 5% to 95%
Encoding used: 2262/1527
Power supply: 9 V battery, type 6F22
Signal range to the central unit: up to 80 m with direct line of sight

Descriptions and specifications are for informational purposes only and are subject to change without prior notice.